ac easy seal, ac sealant, R410a stop leak,r410a stop leak, stop leak ac, R22

Description

Treats Refrigeration & A/C Systems up to 1.5 Tons with UV Dye added
Added bonus direct inject sealant gun
1st connect your direct inject product to the gun
2nd connect the opposite end of direct inject product to low side port and inject.
Allow system to circulate for 1 hour. Use only enough CO2 to empty the direct inject product.
Description
Enviro-Safe is the only proven refrigeration sealer on the market with 18 years’ experience and over 3 million leaks permanently sealed.
Enviro- Safe Seal It travels with the refrigerant gas which allows the sealant to find and permanently seal the leaks faster.
If the system is ever opened up our sealant will be evacuated with the gas.
Our concentrated formula will permanently seal small holes in A/C condensers, evaporators, fittings, and metal line sets. Perfect for split system, heat pumps,
micro-channel
coils, packaged units, and mini splits. Compatible with all oils and refrigerants except ammonia.
Our formula seals leaks permanently and reacts to air and moisture where the leak occurs. If the system has not leaked below 15 psi, there is typically not air or moisture in the system.
Enviro- Safe is a family owned business and the inventor of the direct inject application.
Direct inject system is designed with check valves inside the tubes to prevent accidental release of sealant.
Concentrated formula means less material in system.
·
Clear tube design so you can see the sealant go into the system
·
No need to pump down R-410A units.
·
Perfect for split systems, heat pumps, micro-channel coils, packaged units,  and mini- splits.
·
No injection hose or caulk gun needed.
·
One time use.
·